Tritech Forensics

System Features:
• Cost Effective - Rechargeable cyanoacrylate cartridge - no need to purchase expensive one-use-only cartridges
• Efficient - Approximately 5-10 minutes of cyanoacrylate fuming at recommended butane fuel setting
• Fast - Latent prints are developed in seconds

Additional Features:
A) The clear, 11" diameter plastic dome allows you to monitor the prints as they develop.
B) The Fuma-Dome™ can be used for developing prints on larger surfaces such as glass windows, doors, tabletops, or even vehicles.
C) The Fuma-Dome™ can also be used as a traditional fuming gun. When used in this manner, the dome directs the cyanoacrylate fumes away from you.

Developing latent prints with Fuma-Dome™ is simple and straightforward:

Step 1 - Squeeze trigger and depress button on back to lock in "on" position. Fumes will begin.
Step 2 - Place the Fuma-Dome™ over any evidence where you expect to find prints. Prints will start to develop within a few seconds.

Recharging the cartridge:

After the cyanoacrylate is depleted, recharging is quick and easy:
Step 1 - Squeeze six to seven drops of our liquid cyanoacrylate onto the porous steel ball located between the two bronze retaining screens.
Step 2 - After approximately five minutes of drying time, slide the cyanoacrylate cartridge back onto the torch, and your Fuma-Dome™ is ready for the next time you need it. A recharged cartridge will provide you with approximately five to ten minutes of fuming.

Fuma-Dome™ was developed by David E. Weaver, CLPE.